Concrete Wave Magazine is supported by its audience. When you buy via links on this site, we may earn an affiliate commission. Learn more

The Best Skateboard Wheels for Concrete Parks

best skateboard wheels for concrete parks

What do you think is one of the most significant parts of skateboarding? It’s the wheels. These allow you to roll in the street and parks in whatever acceleration you desire.

On the other hand, you must choose wheels that are appropriate for your skateboard and the place where you will ride. Also, they must complement your riding level.

In this article, we are going to tackle the best skateboard wheels for concrete parks. We hope that this will help you in choosing wheels particularly designed for concrete parks. After a thorough study, we believe that these skatepark wheels can help you achieve your desired speed.

Best Skateboard Wheel for Concrete Parks Reviews

1. TGM Skateboards Wheels

The hardness of these wheels, which is 92A or 99A durometer, brings them to the top of our list. This product comes with a complete set consisting of 4 wheels, 4 spacers, 8 bearings, and 8 bearing washers.

The 99A rating makes these wheels solid and hard, suitable for concrete parks. Hence, you can also perform advanced tricks with these wheels because they can easily grip concrete pavements.

You may also choose from different diameters, such as 50mm, 54mm, and 60mm. Keep in mind that the bigger the wheels, the longer you can roll. The common size diameter of the wheels is around 50mm to 54mm, so these are perfect for park and street skateboarders.

The set is a good deal too because there is no need to buy the other parts separately. Another good thing is that the bearings have a rating of ABEC 7, which means they can reach around 20,000 to 30,000 rpm. If you have 54mm wheels, you can roll at a speed of more than 200 km/h.

Also, this product offers wheels with a durometer of 92A, which is softer than 99A. These are marked “GEL” in color and perfect for skateboard beginners. They can skate smoothly in parks and streets with these wheels.

The wheels are made from polyurethane, which is hard plastic. What is good about polyurethane is that it can endure a high load capacity. It also has floor protection, which is good for concrete parks. Also, it has shock absorption and noise reduction.

The only drawback I see is the lubricant of the bearings. It would be better if it were less thick.
Pros
  • Constructed from polyurethane
  • Bearings have ABEC 7 rating
  • You can choose from different diameter wheels and two durometer ratings
  • Comes with a set of 4 wheels, 4 spacers, 8 bearings, 8 bearing washers
Cons
  • Bearings’ lubricant is too thick.
Overall, the TGM Skateboard wheels are built from hard and durable material with 99A and 92A durometers. These make them ideal for concrete skateparks or streets.

2. Ricta Skateboard Wheels

The stand-out thing with Ricta Skateboard wheels is their easy grip on surfaces, including the concrete park. Hence, you can perform tricks well with these wheels.

Many users of these wheels are satisfied with their performance and build. The wheels are modern-shaped. They are not bulky and heavy, which is good for cruising along the road and parks. These wheels are one of the best skateboard wheels for cruising.

Also, the wheels are somewhat in between hard and soft. They can slide well and even roll over crushed stones and pebbles. These wheels are ideal for rough concrete surfaces and street roads.

The sizes of these wheels range from 52mm to 60mm. They have a durometer of 78a and are made from urethane with a 78D core. You can also pick the 92A option if you want something tougher.

What I also like about these wheels is that they have quality bearings that make the ride faster and smoother. They can skate past ditches and cracks with no problem and are indeed unstoppable.

On the downside, I had to push a bit more than usual while using these wheels. If you live in a windy area like I do, you might have the same problem.
Pros
  • Outstanding grip suitable for rough and concrete surfaces
  • Modern wheels that aren’t bulky or heavy
  • Can slide well because of its material that is in between hard and soft
  • Available in different sizes and durometers
  • Equipped with quality bearings for a smooth and fast ride
  • Can skate pass ditches and cracks easily
Cons
  • Requires pushing in windy weather
In general, the Ricta Skateboard wheels are best for cruising in concrete parks and streets. This is because of their construction, which is somewhat between hard and soft.

3. Shark Wheel Skateboard Wheels

These wheels have unique characteristics that help roll and slide on the roads. They have a sine wave design and grooves for superb control. They may look square at first glance, but they are perfectly round.

The sine wave design has three lips for each wheel. This feature provides an easy and superior grip on surfaces, including concrete. What’s more, it reduces the friction that leads to a slower ride. The wave design also lessens wheel jamming on pebbles and cracks, which makes it suitable for rough roads.

The grooves on the wheels allow for a stable contact patch on the ground. They also remove pebbles, gravel, or sand on the wheels, resulting in a better and fast ride. This leads to less hydroplaning, which is always a plus.

Also, these Shark wheels come in a bigger size — around 60mm in diameter. This makes them very suitable for hard surfaces, especially in concrete parks. You may also use these skateboard wheels for rough roads.

Unlike the other wheels that come with extra components, this package only comes with four wheels. The bearings and spacers are not included. Thus, you have to purchase these components for your Shark wheels.
Pros
  • Designed with sine waves that provide superior grip on concrete surfaces.
  • Reduces friction, lessens jamming on pebbles and cracks
  • Has groove patterns that can shred pebbles, gravel, and sand
  • Stable contact patch on the ground
  • A huge diameter of around 60mm
Cons
  • It does not have bearings and spacers
These Shark Wheels are great for cruising and rolling in concrete parks. This is because of their characteristics, such as the sine wave design, grooves, and huge diameter. These skateboard wheels are highly rated by users.

4. Losenka Skateboard Wheels

Many people like the cool design of these Losenka wheels, which takes inspiration from the photo of a North American gray wolf shouting at the big moon. These wheels are equipped with bearings that have an ABEC 9 rating. With this rating, the wheels can achieve a greater speed and may reach 20,000 to 30,000 rpm.

The wheels are hard, too, with a durometer of 95A, which is very suitable for skateparks, concrete, asphalt roads, U-shaped pools, and squares.

These wheels are built from polyurethane, which is known for its durability. Because polyurethane is tough plastic, this makes the wheels appropriate for concrete parks and longer rides. The wheels have also undergone a cold infusion process, making them more wear-resistant, rigid, and firm.

This model from Losenka has a decent size of around 52 mm in diameter, an ideal size for concrete parks. Its width is about 30 mm, and you get four wheels in one purchase.

However, the package does not include washers. On the other hand, its price is affordable, and you can buy washers with your spare money rather than buy pricey wheels. Also, it has received satisfactory ratings from users.
Pros
  • Four wheels with a cool design
  • Equipped with ABEC 9 bearings for a speedy ride.
  • Has a durometer of 95A, suitable for asphalt roads, U-shaped pools, and more
  • Has an ideal size of 52mm, suitable for concrete parks
  • Made from polyurethane and undergone cold infusion
  • Has an affordable price and good user ratings
Cons
  • The package does not have washers.
Generally, the Losenka skateboard wheels are of decent quality wheels. These wheels have gone through a cold infusion process, making them hard and tough, which is best for rolling in concrete parks.

5. Spitfire Skateboard Wheels

Most users of Spitfire skateboard wheels are satisfied with their performance. They like the wheels for their reliability and long life span and the fact that they do not get flat easily.

What they also love about these wheels is their hardness with a durometer of 99A. Because of this, the wheels have outstanding grip and great speed. They are suitable for concrete parks and streets.

The wheels are also great for beginners who roll on the street, pools, ramps, skate parks, and smooth surfaces. Besides, they have adequate tread, which I like.

These wheels are also made in the United States and of high quality. The design of the wheels is cool, too, and looks great underneath the board. The combination of green and white is attractive, especially when used with the free Spitfire sticker. Users prefer these wheels for longer use and smooth rides.

That said, this product from Spitfire is not perfect, as the paint on the wheels does not stay on for long. This is one of the downsides I see in these wheels. The wheels also do not have bearings for extra components, so you’ll have to buy them separately.
Pros
  • Have a durometer of 99A that offers outstanding grip and high speed
  • Good for beginners who roll on ramps, pools, and more
  • Do not get flat easily and can last long
  • Made in the United States and of high quality
  • Have a good design and nice tread
  • Great if you want smooth rides
Cons
  • Paint does not stay on for long
  • Bearings do not come with purchase
Users find the Spitfire skateboard wheels to be great for smooth surfaces such as concrete. They have arguably the best grip and traction and are among the highest-ranking skateboard wheels.

6. Orangatang Skateboard Wheels

One of the best longboard wheels are the Orangatang Stimulus wheels with 70mm diameter. That is quite a huge size and a plus. These wheels are great for carving and cruising, and you can choose from the three colors available.

The purple color wheels are quite hard with a durometer of 83A. The yellow color wheels have a durometer of 86A, which is firmer than the purple wheels. Meanwhile, the orange color wheels are the softest with a durometer of 80A. All options are quite sturdy and are perfect for carving and cruising. What’s more, you can include or exclude bearings in your purchase.

With the wheels’ big diameter, your board can perform advanced tricks and slides. Also, you can shred debris, pebbles, or crushed stones along the way, resulting in a continuous and smooth ride.

Another good thing about these wheels is that they can grip well on the ground. Thus, carvings are not challenging to perform when your board has these.

On the other hand, I found that the holes are a bit small for my bearings. I could still fit them in, but it took a little effort. Most customers don’t have the same problem, though, so I don’t think this is something to worry about.
Pros
  • Great for carving and cruising
  • Have a 70 mm diameter that is ideal for tricks and slides
  • Can shred crushed stones, pebbles, and debris for a continuous, smooth ride
  • Nice grip on the ground
  • Have three variants of durometer
  • Can include or exclude bearings in purchase
Cons
  • Holes might be a bit small for some bearings
Overall, the Orangatang Stimulus wheels are top-rated, just like other wheels reviewed in this article. They are durable, last longer, and provide the best and smooth rides.

7. BYBAIZ Skateboard Wheels

What caught my eyes with these wheels are the graphic designs that make them look good on the skateboard. You can pick from three different options: white checker, white/green, and white/red, all of which are cool and appealing.

Another thing that I like about these wheels is that they are great for slides. These may be considered as skateboard wheels for powerslides. So, if you are looking for wheels perfect for slides, the BYBAIZ wheels are ideal.

Also, the wheels are hard. They have a durometer of 102A, which is very firm. Thus, they are perfect for longer trips. You can also speed up while using these, whether your board’s on a rough or smooth surface.

These wheels are also good for asphalt roads, concrete parks, U-shaped pools, and squares. They have a dual-conical shape and a 52 mm diameter size, the former of which provides stability. The wheels are built from polyurethane, which is durable hard plastic.

The package comes with 4 wheels at an affordable price. On the other hand, you have to purchase the other components such as bearings, spacers, and washers to complete your skateboard, which is the only drawback I see on these wheels.
Pros
  • Have a durometer of 102A, so the wheels are firm and tough
  • Can achieve high speeds on both rough and smooth surfaces
  • Made for asphalt roads, U-shaped pools, and more
  • The stable polyurethane wheels are great for slides
  • You may choose from the three appealing graphic designs
  • Come at an affordable price
Cons
  • Package does not include bearings, washers, and spacers
I find the BYBAIZ skateboard wheels as decent wheels for skateboarding. They are of quality and very tough wheels that are great for slides. Also, the designs of the wheels make a perfect match for your skateboard.

8. Rollerex Phaser Skateboard Wheels

Are you looking for a price that is right for good wheels? Then, the Rollerex Phaser skateboard wheels are for you. They are available in three packages you can choose from.

The first package consists of 4 red wheels at a reasonable price. The second package is complete with four red wheels, bearings, spacers, and washers, while the third package has the same number of components as the second one, but with black wheels. With these packages and their prices, you indeed have good deals.

The wheels are 54mm in diameter with a durometer of 92A. The diameter of the wheel is ideal for a concrete park.

The wheels are made of high-density, abrasion-resistant urethane that can endure heavy use. Hence, they can last longer compared to other wheels. Plus, the manufacturer provides a 30-day money-back guarantee, so you don’t have to worry about losing your hard-earned cash if the product is disappointing.

On the other hand, the bearings are of ABEC 5 rating, which is somewhat of low precision. That said, this rating still provides low friction and acceptable speeds, so I don’t think they will be a problem for most people.
Pros
  • Price is reasonable
  • They come in three packages, two of which have bearings, washers, and spacers.
  • Have a durometer of 92 A that is ideal for concrete parks
  • Have a 54mm diameter size
  • Made of urethane that is high-density and abrasion-resistant
  • 30-day money-back guarantee
Cons
  • Bearings have an ABEC 5 rating only
If you are on a tight budget and want to purchase a complete set of wheels including bearings, washers, and spacers, the Rollerex Phaser skateboard wheels are good for you. These wheels can provide a decent and smooth ride that you may enjoy. I also find these wheels perfect for beginner skateboarders.

9. Freedare Skateboard Wheels

Another good deal for skateboard users is this offering from Freedare that comes with four wheels and eight bearings already correctly installed.

I find these wheels suitable for beginners because of their softness and the nice grip on concrete surfaces. This is because they are 54mm in diameter and have a durometer of 90A, which is hard enough.

The hardness can help you achieve a smooth, stable, and fast ride. The wheels are constructed from polyurethane, which is durable and tough plastic. Hence, you can use these wheels for a longer period.

Users find these wheels perfect for cruising. They also use them for smooth concrete roads, asphalt roads, ramps, and sidewalks. The wheels are also lightweight, which is ideal for performing tricks.

However, that’s not all this product has to offer. There’s a six-month warranty on this Freedare model, so you get good customer service out of your purchase as well.

On the other hand, the bearings do need a little care to ensure they can perform well. You need to wet them with rubbing alcohol and shake them to remove the grease. Remember to put some skate lube on the bearings, as well.
Pros
  • Have a 90A durometer, which is hard enough for a smooth, stable, fast ride
  • The package comes with four wheels and eight bearings already installed.
  • With 54mm diameter in size, perfect for concrete parks
  • Lightweight polyurethane wheels
  • Ideal for beginners and perfect for cruising, ramps, asphalt roads, and more
  • Come with a 6-month warranty
Cons
  • Bearings need a little care to work well
If you are a skateboarder beginner, I recommend the Freedare skateboard wheels. This is because they are soft but hard enough and good for cruising on concrete surfaces. Besides, they are lightweight, and you can learn to do tricks fast and easily.

10. Tobwolf Skateboard Wheels

Tobwolf skateboard wheels are decent wheels with a 95A durometer, which is hard and provides balance and an easy grip. They have a 52mm diameter, which is good for wheels for concrete parks.

What I like about this package is that it has eight bearings with an ABEC 9 rating. It is high-precision and can deliver a smooth roll and ride. The bearing’s outer diameter is around 22 mm, and the inner diameter is about 8mm.

The wheels are made from a solid polyurethane material that will not easily crack and be torn. In other words, they are wear-resistant. The color of the wheels is white and looks simple and neat on the skateboard.

The wheels are perfect for ramps, concrete parks, and streets, but they are not useful on uneven ground. They are also good at performing tricks such as slides and freestyling. They also have a grippy edge that can aid in riding downhill.

Most users of these wheels are satisfied with their performance. However, they put oil on the bearings to make them work well. This is one downside I see in these wheels. If you want to improve your riding, you can buy more high-quality bearings for these wheels and have an amazing ride.
Pros
  • Have a 95A hardness that can deliver a good balanced grip.
  • 52mm diameter, suitable for concrete surfaces
  • Equipped with eight bearings that have an ABEC 9 rating
  • Made from durable polyurethane
  • Perfect for ramps, streets, performing tricks, and freestyling
  • White color looks simple and neat
Cons
  • Not useful on uneven ground
  • Need to put oil in the bearings to make them roll well
In general, the Tobwolf skateboard wheels are among the quality wheels for beginners. Besides, you can get them at a reasonable price, at which eight bearings are included.

What to Look for When Buying Skateboard Wheels for Concrete Parks

best-skateboard-wheels-for-skateparks

Skate parks that are made of concrete are more durable than those constructed from wood or steel. Concrete parks have smooth surfaces but may tend to be slippery. Also, you will have a quieter ride on concrete than on steel or wood.

On the other hand, you have to consider which wheels are best suited for your board and concrete parks. Some wheels might not be appropriate for concrete parks. To help you choose the best skatepark wheels for concrete surfaces, here is the skateboard wheels guide that you may consider:

Choose the wheels that have the following characteristics:

  • Wheels are made from polyurethane

As mentioned above, polyurethane is a hard and strong plastic material. Polyurethane and concrete complement one another.

The traction between them is excellent. Also, it provides skateboarders with a good feeling of their board because of the smooth ride.

  • Wheels are hard

Hard wheels are suitable for smooth surfaces such as concrete parks. So, how will you know if the wheels are hard enough?

You have to determine the durometer scale of the wheels. This is a 100-point scale that evaluates the hardness of skateboard wheels. The higher the number, the harder the wheels.

The best durometer A scale for wheels may be around 99A. This makes for solid and hard wheels that are perfect for concrete parks. Meanwhile, soft wheels are good for street rolling.

If you are rolling on skateparks, you may choose wheels that have an 84B rating, such as the bones skateboard wheels. This durometer B scale is another way to measure skate wheels hardness. The 84B bone wheel rate is equivalent to 104A.

  • Wheels have outstanding grip

Since the concrete surfaces are quite slippery, your wheels must have an easy and outstanding grip. Most wheels that have a higher durometer scale have a good grip on concrete surfaces. If the wheels are hard, they hold onto concrete well. Besides, you can easily perform tricks and have great speed.

  • Wheels have a decent and bigger diameter

A decent diameter that is around 53 to 54mm or above is a good choice for concrete park skating. This is because it provides balance and speed.

Large wheels can help you balance yourself on the board and have a fast ride, resulting in an enjoyable and successful skateboarding experience. Besides a bigger diameter, look for conical shapes and lip wheels.

Conclusion

The above-recommended products have undergone long hours and thorough research. We believe that these best skateboard wheels for concrete parks can provide you with a smooth ride on concrete surfaces. Also, these wheels are picked by many customers, and they are satisfied with their performance.

You may go over these best skateboard wheels for skateparks and choose the most suitable for your board. Indeed, choosing the right one can give you a quality and enjoyable skateboarding experience.

Leave a Comment